This historic book may have numerous typos and missing text. Purchasers can download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1920 Excerpt: ...2--If either needle or seat is damaged, it is best practice to renew both parts as grinding is uneconomical and is not sure to produce a good job. The only excuse for grinding is lack of new parts. 3--The inlet needle seat is best removed with a special tool shown in Fig. 77, although it can be done with a screwdriver. ...
Read More
This historic book may have numerous typos and missing text. Purchasers can download a free scanned copy of the original book (without typos) from the publisher. Not indexed. Not illustrated. 1920 Excerpt: ...2--If either needle or seat is damaged, it is best practice to renew both parts as grinding is uneconomical and is not sure to produce a good job. The only excuse for grinding is lack of new parts. 3--The inlet needle seat is best removed with a special tool shown in Fig. 77, although it can be done with a screwdriver. The use of the tool, however, prevents burring and damaging the outside of the seat and the slot. The seat fits in against a gasoline-proof fiber gasket. If this is torn or damaged during the removal of the seat, it should be replaced also, making sure that all of the old gasket is removed. 4--See that the needle seat is screwed in against the gasket. 5--Owing to the triangular shape of the needle body and the shoulders which guide it, there is a possibility that one of thesa shoulders might catch in the screwdriver slot in the needle seat when the float drops to the bottom of the empty float chamber. If the float chamber has been drained and floods upon again being filled, the needle can easily be jarred loose by a slight tap with a hammer or wrench on the side of the carbureter body. 6--The tightness of the fuel inlet needle may be ascertained by turning the carbureter upside down, allowing the weight of the float to hold the needle on its seat and then sucking lightly on the fuel inlet elbow. If the valve is tight it should stick to the tongue or lips much the same as in the case of a small bottle. The Spray Nozzle 1--The spray nozzle is held down against a gasket by means of a thread on the lower end which extends down into the stem of the mixing chamber below the hole which admits the gasoline to the inside of the stem. It forms the seat for the needle valve and also embodies a cup into which the low-speed tube extends. 2--See that the n...
Read Less
Choose your shipping method in Checkout. Costs may vary based on destination.
Seller's Description:
PLEASE NOTE, WE DO NOT SHIP TO DENMARK. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Please note we cannot offer an expedited shipping service from the UK.
Choose your shipping method in Checkout. Costs may vary based on destination.
Seller's Description:
PLEASE NOTE, WE DO NOT SHIP TO DENMARK. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Please note we cannot offer an expedited shipping service from the UK.
Choose your shipping method in Checkout. Costs may vary based on destination.
Seller's Description:
PLEASE NOTE, WE DO NOT SHIP TO DENMARK. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Please note we cannot offer an expedited shipping service from the UK.
Choose your shipping method in Checkout. Costs may vary based on destination.
Seller's Description:
PLEASE NOTE, WE DO NOT SHIP TO DENMARK. New Book. Shipped from UK in 4 to 14 days. Established seller since 2000. Please note we cannot offer an expedited shipping service from the UK.