Two dimensional analysis are carried out to provide new findings on the Twin Tunnel wall thickness optimization. It finds the wall thickness of tunnel openings which is prepared at varying width between twin tunnel in the modelling Phase-II software. The analysis is based on residual and peak parameters of rock mass properties. The overburden depth, extraction ratio and factor of safety are considered for model analysis. It focuses on Elasto-Plastic rock masses with non-linear failure criteria and non-associated flow laws. ...
Read More
Two dimensional analysis are carried out to provide new findings on the Twin Tunnel wall thickness optimization. It finds the wall thickness of tunnel openings which is prepared at varying width between twin tunnel in the modelling Phase-II software. The analysis is based on residual and peak parameters of rock mass properties. The overburden depth, extraction ratio and factor of safety are considered for model analysis. It focuses on Elasto-Plastic rock masses with non-linear failure criteria and non-associated flow laws. The rock properties are assigned in residual and peak values in Mohr's columns failure criteria.Empirical and analytical methods are used for support design that is required by induced stresses and displacement. The support system is designed based on empirical as well as data from the Phase II simulation. The rock mass properties are assigned through RMR and Q-system and the result is similar with the design model.
Read Less